TECHNICAL DATA SHEET

GLOW IN THE DARK PIGMENT

product description

The Concrete Protector’s Glow-in-the-Dark Pigments absorb light and slowly emit a glow over time.

STANDARD COLORS: Crimson, Bright Yellow Green, Blue-Green
 
OTHER COLORS AVAILABLE: Crimson, Bright Yellow Green, Blue-Green
 
REVISION DATE: July 13, 2021

CURE SCHEDULE (75°)

POT LIFE (1.5 GAL VOLUME): N/A

TACK FREE (DRY TO TOUCH): N/A

RECOAT OR TOPCOAT: N/A

LIGHT FOOT TRAFFIC: N/A

FULL CURE: N/A

COVERAGE

Recommended as an additive to resins, sealers, clear coats, and epoxies.

COVERAGE: N/A

MIXED RATIO: 1-2 bottles per gallon of mixed material

RECOMMENDED FILM THICKNESS: N/A

PACKAGING INFORMATION: Packaged in an 8 oz. bottle

PHYSICAL PROPERITES

ODOR: None

ODOR THRESHOLD: Not applicable

pH: Not applicable

MELTING POINT/FREEZING POINT: No information available

INITIAL BOILING POINT AND BOILING RANGE: No information available

FLASHPOINT: >1050°C

FLAMMABILITY (SOLID, GAS): No information available

UPPER/LOWER FLAMMABILITY OR EXPLOSIVE LIMITS: No information available

VAPOUR PRESSURE: No information available

VAPOUR DENSITY: No information available

RELATIVE DENSITY: 3.6g/cm3

SOLUBILITY(IES): Water solubility 300mg/l @ 20°C and pH 11.35

PARTITION COEFFICIENT (N-OCTANOL/WATER): Log Pow: 0 @ 20°C and pH 11.92 – 11.96

AUTOIGNITION TEMPERATURE: No information available

DECOMPOSITION TEMPERATURE: No information available

VISCOSITY: No information available

EXPLOSIVE PROPERTIES: No information available

OXIDISING PROPERTIES: Not oxidizing

CHEMICAL RESISTANCE

N/A

LIMITATIONS

  • Pre-mix into resin component of desired coating product to avoid streaking or comet trail effects
     
     
     

BENEFITS

  • Original artistic design effects
  • Easy field blending & installation
  • Multi-dimensional color effects
  • High temperature resistance
  • Exceptional light fastness & weather resistance
 

INSTRUCTIONS

  1. Shake jar
  2. Add appropriate amount to the resin component of clear coating
  3. Mix thoroughly
  4. Optional* Let set for 12-24 hours for air release

NOTICE TO BUYER:

DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY:

The Concrete Protector (Division of Incredible Products, LLC), warrants that all products are assembled under rigorous quality assurance specifications and that all information supplied is exact. All information supplied is not to be taken as a warranty, but for you to conduct your own test to determine if the given product is suitable for your distinct purpose. The following list of properties should not be interpreted as specifications. CONVEYED OR SUGGESTED, NO WARRANTY IS BUILT UPON ANY DISCOVERED RESULTS OR INFORMATION YOU WILL OBTAIN DURING USE. CONVEYED OR SUGGESTED NO WARRANTY IS BUILT THAT THE GIVEN PRODUCT SHALL BE MARKETABLE OR THAT THE GIVEN PRODUCT WILL BE FIT FOR ANY DISTINCT PURPOSE. NO WARRANT IS BUILT UPON SAID INFORMATION OR THAT THE GIVEN PRODUCT WILL NOT INFRINGE UPON ANY PATENT. The Concrete Protector is NOT liable for, direct or indirect, inadvertent or onsequential damages. The Concrete Protector’s liability is and will only be limited to the net selling price of our products or, at our discretion, the replacement of our products. Upon delivery of our products, your acceptance means that you accept all terms of this warranty even if other documents and or purchase orders astray from the terms of this warranty. No representative, on our behalf, is permitted to make any representation, warranty, or assume liability with any sale of our products. OUR PRODUCTS CONTAIN CHEMICALS THAT CAN CAUSE SERIOUS PHYSICAL INJURY. BEFORE THE USE OF OUR PRODUCTS, READ ALL MATERIAL AND FOLLOW ALL LISTED PRECAUTIONS TO AVOID ANY BODILY HARM